|
The range of BCE power supplies (10Amp and 5Amp) have been specifically designed for radio and telecommunications applications demanding high reliability, low noise, fully automatic battery backup, battery protection and full protection of the output.
Since the BCE product has been on the market, we have nearly sold 10,000 units. From the feedback we receive, we are proud to say that the unit is very reliable and it seems to cause you very few problems.
Are you getting the most out of your battery charger? Here are the 3 ways in which the unit can be used: The full features of the unit are realised when both a battery and a load (radio equipment) are connected so that it operates as a power supply with power fail protection. Under normal conditions an internal switch connects the battery in parallel with the load. The average load must be less than the capability of the power supply to ensure there is a remainder available to float charge the battery. When a mains failure occurs, the power supply no longer provides power. The battery now supports the load without interruption of the load. Restoration of the mains restarts the power supply, which will resume support of the load and charging of the battery. During extended mains failures the unit disconnects the battery before it becomes excessively discharged. The battery is automatically reconnected when the mains recovers. This feature contributes to long battery lifetime and allows unattended operation of a system.
As a battery eliminator it may be used to power equipment requiring 12V - 14V at 10Amps (SME240-12-10) or 24 - 28V at 5 Amps (SME240-24-5). It is fully protected against overload and short circuit as well as incorporating over voltage protection.
As a lead acid battery charger it will provide safe and convenient method to restore discharged batteries. Fully charged batteries can be left connected to the unit indefinitely with no adverse effects on their lifetime.
|
